Void v7.1
Specs:
Weight : 145g
Dimensions : roughly 140x100x45mm
Wheels : 38mm diameter, 3D printed hub, foam wheel, various grip materials.
Drive Motors : Pololu HP 100:1 gearmotors
Drive ESCs : Pete Waller's option B
Weapon Servo : Park HPX F
Reciever : Spektrum AR6300
Power : 12.6v 300mah 3-cell lipo pack
Chassis : 3D printed
Armor : 1mm polycarbonate, 0.8mm titanium
Status : Retired
Dimensions : roughly 140x100x45mm
Wheels : 38mm diameter, 3D printed hub, foam wheel, various grip materials.
Drive Motors : Pololu HP 100:1 gearmotors
Drive ESCs : Pete Waller's option B
Weapon Servo : Park HPX F
Reciever : Spektrum AR6300
Power : 12.6v 300mah 3-cell lipo pack
Chassis : 3D printed
Armor : 1mm polycarbonate, 0.8mm titanium
Status : Retired
Information:
I was pretty happy with how Void was performing, and so decided to keep it running while I was designing the next version. I took out the vacuum pump, which had just been dead weight since I failed at getting it to work, and used the extra weight to put in 300mah batteries, so I could run for a long time without needing to recharge, which was great for allowing me to have more fun battles at tournaments. I also started using Void as a testbed for new grip materials, as I was getting fed up with the unpredictability of Dycem, and wanted to find a good, long-term alternative. The robot and it's construction are pretty sturdy, so I'm hoping to keep it running until I complete Void 8.